Setup and Config
Getting and Creating Projects
Branching and Merging
Sharing and Updating Projects
Inspection and Comparison
- Command-line interface conventions
- Everyday Git
- Frequently Asked Questions (FAQ)
- All guides...
Run tasks to optimize Git repository data, speeding up other Git commands and reducing storage requirements for the repository.
Git commands that add repository data, such as
git add or
are optimized for a responsive user experience. These commands do not take
time to optimize the Git data, since such optimizations scale with the full
size of the repository while these user commands each perform a relatively
git maintenance command provides flexibility for how to optimize the
Initialize Git config values so any scheduled maintenance will start running on this repository. This adds the repository to the
maintenance.repoconfig variable in the current user’s global config and enables some recommended configuration values for
maintenance.<task>.schedule. The tasks that are enabled are safe for running in the background without disrupting foreground processes.
registersubcommand will also set the
maintenance.strategyconfig value to
incremental, if this value is not previously set. The
incrementalstrategy uses the following schedule for each maintenance task:
git maintenance registerwill also disable foreground maintenance by setting
maintenance.auto = falsein the current repository. This config setting will remain after a
git maintenance unregistercommand.
Run one or more maintenance tasks. If one or more
--taskoptions are specified, then those tasks are run in that order. Otherwise, the tasks are determined by which
maintenance.<task>.enabledconfig options are true. By default, only
Start running maintenance on the current repository. This performs the same config updates as the
registersubcommand, then updates the background scheduler to run
git maintenance run --scheduledon an hourly basis.
Halt the background maintenance schedule. The current repository is not removed from the list of maintained repositories, in case the background maintenance is restarted later.
Remove the current repository from background maintenance. This only removes the repository from the configured list. It does not stop the background maintenance processes from running.
commit-graphjob updates the
commit-graphfiles incrementally, then verifies that the written data is correct. The incremental write is safe to run alongside concurrent Git processes since it will not expire
.graphfiles that were in the previous
commit-graph-chainfile. They will be deleted by a later run based on the expiration delay.
prefetchtask updates the object directory with the latest objects from all registered remotes. For each remote, a
git fetchcommand is run. The configured refspec is modified to place all requested refs within
refs/prefetch/. Also, tags are not updated.
This is done to avoid disrupting the remote-tracking branches. The end users expect these refs to stay unmoved unless they initiate a fetch. With prefetch task, however, the objects necessary to complete a later real fetch would already be obtained, so the real fetch would go faster. In the ideal case, it will just become an update to a bunch of remote-tracking branches without any object transfer.
Clean up unnecessary files and optimize the local repository. "GC" stands for "garbage collection," but this task performs many smaller tasks. This task can be expensive for large repositories, as it repacks all Git objects into a single pack-file. It can also be disruptive in some situations, as it deletes stale data. See git-gc for more details on garbage collection in Git.
loose-objectsjob cleans up loose objects and places them into pack-files. In order to prevent race conditions with concurrent Git commands, it follows a two-step process. First, it deletes any loose objects that already exist in a pack-file; concurrent Git processes will examine the pack-file for the object data instead of the loose object. Second, it creates a new pack-file (starting with "loose-") containing a batch of loose objects. The batch size is limited to 50 thousand objects to prevent the job from taking too long on a repository with many loose objects. The
gctask writes unreachable objects as loose objects to be cleaned up by a later step only if they are not re-added to a pack-file; for this reason it is not advisable to enable both the
gctasks at the same time.
incremental-repackjob repacks the object directory using the
multi-pack-indexfeature. In order to prevent race conditions with concurrent Git commands, it follows a two-step process. First, it calls
git multi-pack-index expireto delete pack-files unreferenced by the
multi-pack-indexfile. Second, it calls
git multi-pack-index repackto select several small pack-files and repack them into a bigger one, and then update the
multi-pack-indexentries that refer to the small pack-files to refer to the new pack-file. This prepares those small pack-files for deletion upon the next run of
git multi-pack-index expire. The selection of the small pack-files is such that the expected size of the big pack-file is at least the batch size; see the
--batch-sizeoption for the
repacksubcommand in git-multi-pack-index. The default batch-size is zero, which is a special case that attempts to repack all pack-files into a single pack-file.
pack-refstask collects the loose reference files and collects them into a single file. This speeds up operations that need to iterate across many references. See git-pack-refs for more information.
When combined with the
runsubcommand, run maintenance tasks only if certain thresholds are met. For example, the
gctask runs when the number of loose objects exceeds the number stored in the
gc.autoconfig setting, or when the number of pack-files exceeds the
gc.autoPackLimitconfig setting. Not compatible with the
When combined with the
runsubcommand, run maintenance tasks only if certain time conditions are met, as specified by the
maintenance.<task>.scheduleconfig value for each
<task>. This config value specifies a number of seconds since the last time that task ran, according to the
maintenance.<task>.lastRunconfig value. The tasks that are tested are those provided by the
--task=<task>option(s) or those with
maintenance.<task>.enabledset to true.
Do not report progress or other information over
If this option is specified one or more times, then only run the specified tasks in the specified order. If no
--task=<task>arguments are specified, then only the tasks with
trueare considered. See the TASKS section for the list of accepted
git maintenance command is designed to simplify the repository
maintenance patterns while minimizing user wait time during Git commands.
A variety of configuration options are available to allow customizing this
process. The default maintenance options focus on operations that complete
quickly, even on large repositories.
Users may find some cases where scheduled maintenance tasks do not run as
frequently as intended. Each
git maintenance run command takes a lock on
the repository’s object database, and this prevents other concurrent
git maintenance run commands from running on the same repository. Without
this safeguard, competing processes could leave the repository in an
The background maintenance schedule runs
git maintenance run processes
on an hourly basis. Each run executes the "hourly" tasks. At midnight,
that process also executes the "daily" tasks. At midnight on the first day
of the week, that process also executes the "weekly" tasks. A single
process iterates over each registered repository, performing the scheduled
tasks for that frequency. Depending on the number of registered
repositories and their sizes, this process may take longer than an hour.
In this case, multiple
git maintenance run commands may run on the same
repository at the same time, colliding on the object database lock. This
results in one of the two tasks not running.
If you find that some maintenance windows are taking longer than one hour
to complete, then consider reducing the complexity of your maintenance
tasks. For example, the
gc task is much slower than the
incremental-repack task. However, this comes at a cost of a slightly
larger object database. Consider moving more expensive tasks to be run
Expert users may consider scheduling their own maintenance tasks using a
different schedule than is available through
git maintenance start and
Git configuration options. These users should be aware of the object
database lock and how concurrent
git maintenance run commands behave.
git gc command should not be combined with
git maintenance run commands.
git gc modifies the object database
but does not take the lock in the same way as
git maintenance run. If
git maintenance run --task=gc instead of
The following sections describe the mechanisms put in place to run
background maintenance by
git maintenance start and how to customize
The standard mechanism for scheduling background tasks on POSIX systems
is cron(8). This tool executes commands based on a given schedule. The
current list of user-scheduled tasks can be found by running
The schedule written by
git maintenance start is similar to this:
# BEGIN GIT MAINTENANCE SCHEDULE # The following schedule was created by Git # Any edits made in this region might be # replaced in the future by a Git command. 0 1-23 * * * "/<path>/git" --exec-path="/<path>" for-each-repo --config=maintenance.repo maintenance run --schedule=hourly 0 0 * * 1-6 "/<path>/git" --exec-path="/<path>" for-each-repo --config=maintenance.repo maintenance run --schedule=daily 0 0 * * 0 "/<path>/git" --exec-path="/<path>" for-each-repo --config=maintenance.repo maintenance run --schedule=weekly # END GIT MAINTENANCE SCHEDULE
The comments are used as a region to mark the schedule as written by Git.
Any modifications within this region will be completely deleted by
git maintenance stop or overwritten by
git maintenance start.
crontab entry specifies the full path of the
git executable to
ensure that the executed
git command is the same one with which
git maintenance start was issued independent of
PATH. If the same user
git maintenance start with multiple Git executables, then only the
latest executable is used.
These commands use
git for-each-repo --config=maintenance.repo to run
git maintenance run --schedule=<frequency> on each repository listed in
maintenance.repo config option. These are typically
loaded from the user-specific global config. The
git maintenance process
then determines which maintenance tasks are configured to run on each
repository with each
<frequency> using the
config options. These values are loaded from the global or repository
If the config values are insufficient to achieve your desired background
maintenance schedule, then you can create your own schedule. If you run
crontab -e, then an editor will load with your user-specific
schedule. In that editor, you can add your own schedule lines. You could
start by adapting the default schedule listed earlier, or you could read
the crontab(5) documentation for advanced scheduling techniques. Please
do use the full path and
--exec-path techniques from the default
schedule to ensure you are executing the correct binaries in your
While macOS technically supports
crontab -e requires
elevated privileges and the executed process does not have a full user
context. Without a full user context, Git and its credential helpers
cannot access stored credentials, so some maintenance tasks are not
git maintenance start interacts with the
which is the recommended way to schedule timed jobs in macOS. Scheduling
git maintenance (start|stop) requires some
launchctl features available only in macOS 10.11 or later.
Your user-specific scheduled tasks are stored as XML-formatted
~/Library/LaunchAgents/. You can see the currently-registered
tasks using the following command:
$ ls ~/Library/LaunchAgents/org.git-scm.git* org.git-scm.git.daily.plist org.git-scm.git.hourly.plist org.git-scm.git.weekly.plist
One task is registered for each
--schedule=<frequency> option. To
inspect how the XML format describes each schedule, open one of these
.plist files in an editor and inspect the
<array> element following
git maintenance start will overwrite these files and register the
tasks again with
launchctl, so any customizations should be done by
creating your own
.plist files with distinct names. Similarly, the
git maintenance stop command will unregister the tasks with
and delete the
To create more advanced customizations to your background tasks, see launchctl.plist(5) for more information.
Windows does not support
cron and instead has its own system for
scheduling background tasks. The
git maintenance start command uses
schtasks command to submit tasks to this system. You can inspect
all background tasks using the Task Scheduler application. The tasks
added by Git have names of the form
Git Maintenance (<frequency>).
The Task Scheduler GUI has ways to inspect these tasks, but you can also
export the tasks to XML files and view the details there.
Note that since Git is a console application, these background tasks
create a console window visible to the current user. This can be changed
manually by selecting the "Run whether user is logged in or not" option
in Task Scheduler. This change requires a password input, which is why
git maintenance start does not select it by default.
If you want to customize the background tasks, please rename the tasks
so future calls to
git maintenance (start|stop) do not overwrite your
Part of the git suite