Setup and Config
Getting and Creating Projects
Branching and Merging
Sharing and Updating Projects
Inspection and Comparison
- Command-line interface conventions
- Everyday Git
- Frequently Asked Questions (FAQ)
- All guides...
- 2.36.1 no changes
- 2.36.0 04/18/22
- 2.30.2 → 2.35.3 no changes
- 2.30.1 02/08/21
- 2.25.2 → 2.30.0 no changes
- 2.25.1 02/17/20
- 2.25.0 01/13/20
- 2.19.1 → 2.24.4 no changes
- 2.19.0 09/10/18
- 2.18.1 → 2.18.5 no changes
- 2.18.0 06/21/18
- 2.17.1 → 2.17.6 no changes
- 2.17.0 04/02/18
- 2.16.6 12/06/19
- 2.15.4 12/06/19
- 2.14.6 12/06/19
- 2.13.7 05/22/18
- 2.10.5 → 2.12.5 no changes
- 2.9.5 07/30/17
git update-index [--add] [--remove | --force-remove] [--replace] [--refresh] [-q] [--unmerged] [--ignore-missing] [(--cacheinfo <mode>,<object>,<file>)…] [--chmod=(+|-)x] [--[no-]assume-unchanged] [--[no-]skip-worktree] [--ignore-submodules] [--[no-]split-index] [--[no-|test-|force-]untracked-cache] [--really-refresh] [--unresolve] [--again | -g] [--info-only] [--index-info] [-z] [--stdin] [--index-version <n>] [--verbose] [--] [<file>…]
Modifies the index or directory cache. Each file mentioned is updated into the index and any unmerged or needs updating state is cleared.
See also git-add for a more user-friendly way to do some of the most common operations on the index.
The way git update-index handles files it is told about can be modified using the various options:
If a specified file isn’t in the index already then it’s added. Default behaviour is to ignore new files.
If a specified file is in the index but is missing then it’s removed. Default behavior is to ignore removed file.
Looks at the current index and checks to see if merges or updates are needed by checking stat() information.
Quiet. If --refresh finds that the index needs an update, the default behavior is to error out. This option makes git update-index continue anyway.
Do not try to update submodules. This option is only respected when passed before --refresh.
If --refresh finds unmerged changes in the index, the default behavior is to error out. This option makes git update-index continue anyway.
Ignores missing files during a --refresh
- --cacheinfo <mode>,<object>,<path>
- --cacheinfo <mode> <object> <path>
Directly insert the specified info into the index. For backward compatibility, you can also give these three arguments as three separate parameters, but new users are encouraged to use a single-parameter form.
Read index information from stdin.
Set the execute permissions on the updated files.
When this flag is specified, the object names recorded for the paths are not updated. Instead, this option sets/unsets the "assume unchanged" bit for the paths. When the "assume unchanged" bit is on, the user promises not to change the file and allows Git to assume that the working tree file matches what is recorded in the index. If you want to change the working tree file, you need to unset the bit to tell Git. This is sometimes helpful when working with a big project on a filesystem that has very slow lstat(2) system call (e.g. cifs).
Git will fail (gracefully) in case it needs to modify this file in the index e.g. when merging in a commit; thus, in case the assumed-untracked file is changed upstream, you will need to handle the situation manually.
--refresh, but checks stat information unconditionally, without regard to the "assume unchanged" setting.
When one of these flags is specified, the object name recorded for the paths are not updated. Instead, these options set and unset the "skip-worktree" bit for the paths. See section "Skip-worktree bit" below for more information.
Runs git update-index itself on the paths whose index entries are different from those from the
Restores the unmerged or needs updating state of a file during a merge if it was cleared by accident.
Do not create objects in the object database for all <file> arguments that follow this flag; just insert their object IDs into the index.
Remove the file from the index even when the working directory still has such a file. (Implies --remove.)
By default, when a file
pathexists in the index, git update-index refuses an attempt to add
path/file. Similarly if a file
path/fileexists, a file
pathcannot be added. With --replace flag, existing entries that conflict with the entry being added are automatically removed with warning messages.
Instead of taking list of paths from the command line, read list of paths from the standard input. Paths are separated by LF (i.e. one path per line) by default.
Report what is being added and removed from index.
- --index-version <n>
Write the resulting index out in the named on-disk format version. Supported versions are 2, 3 and 4. The current default version is 2 or 3, depending on whether extra features are used, such as
git add -N.
Version 4 performs a simple pathname compression that reduces index size by 30%-50% on large repositories, which results in faster load time. Version 4 is relatively young (first released in in 1.8.0 in October 2012). Other Git implementations such as JGit and libgit2 may not support it yet.
Only meaningful with
--index-info; paths are separated with NUL character instead of LF.
Enable or disable split index mode. If split-index mode is already enabled and
--split-indexis given again, all changes in $GIT_DIR/index are pushed back to the shared index file.
These options take effect whatever the value of the
core.splitIndexconfiguration variable (see git-config). But a warning is emitted when the change goes against the configured value, as the configured value will take effect next time the index is read and this will remove the intended effect of the option.
Enable or disable untracked cache feature. Please use
--test-untracked-cachebefore enabling it.
These options take effect whatever the value of the
core.untrackedCacheconfiguration variable (see git-config). But a warning is emitted when the change goes against the configured value, as the configured value will take effect next time the index is read and this will remove the intended effect of the option.
Only perform tests on the working directory to make sure untracked cache can be used. You have to manually enable untracked cache using
core.untrackedCacheconfiguration variable afterwards if you really want to use it. If a test fails the exit code is 1 and a message explains what is not working as needed, otherwise the exit code is 0 and OK is printed.
--untracked-cache. Provided for backwards compatibility with older versions of Git where
--untracked-cacheused to imply
--test-untracked-cachebut this option would enable the extension unconditionally.
Do not interpret any more arguments as options.
Files to act on. Note that files beginning with . are discarded. This includes
dir/./file. If you don’t want this, then use cleaner names. The same applies to directories ending / and paths with //
--refresh does not calculate a new sha1 file or bring the index
up-to-date for mode/content changes. But what it does do is to
"re-match" the stat information of a file with the index, so that you
can refresh the index for a file that hasn’t been changed but where
the stat entry is out of date.
For example, you’d want to do this after doing a git read-tree, to link up the stat index details with the proper files.
--cacheinfo is used to register a file that is not in the
current working directory. This is useful for minimum-checkout
To pretend you have a file with mode and sha1 at path, say:
$ git update-index --cacheinfo <mode>,<sha1>,<path>
--info-only is used to register files without placing them in the object
database. This is useful for status-only repositories.
--info-only behave similarly: the index is updated
but the object database isn’t.
--cacheinfo is useful when the object is
in the database but the file isn’t available locally.
useful when the file is available, but you do not wish to update the
--index-info is a more powerful mechanism that lets you feed
multiple entry definitions from the standard input, and designed
specifically for scripts. It can take inputs of three formats:
mode SP sha1 TAB path
The first format is what "git-apply --index-info" reports, and used to reconstruct a partial tree that is used for phony merge base tree when falling back on 3-way merge.
mode SP type SP sha1 TAB path
The second format is to stuff git ls-tree output into the index file.
mode SP sha1 SP stage TAB path
This format is to put higher order stages into the index file and matches git ls-files --stage output.
To place a higher stage entry to the index, the path should first be removed by feeding a mode=0 entry for the path, and then feeding necessary input lines in the third format.
For example, starting with this index:
$ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 0 frotz
you can feed the following input to
$ git update-index --index-info 0 0000000000000000000000000000000000000000 frotz 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz
The first line of the input feeds 0 as the mode to remove the path; the SHA-1 does not matter as long as it is well formatted. Then the second and third line feeds stage 1 and stage 2 entries for that path. After the above, we would end up with this:
$ git ls-files -s 100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz 100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz
Many operations in Git depend on your filesystem to have an
lstat(2) implementation, so that
information for working tree files can be cheaply checked to see
if the file contents have changed from the version recorded in
the index file. Unfortunately, some filesystems have
lstat(2). If your filesystem is one of them, you
can set "assume unchanged" bit to paths you have not changed to
cause Git not to do this check. Note that setting this bit on a
path does not mean Git will check the contents of the file to
see if it has changed — it makes Git to omit any checking and
assume it has not changed. When you make changes to working
tree files, you have to explicitly tell Git about it by dropping
"assume unchanged" bit, either before or after you modify them.
In order to set "assume unchanged" bit, use
option. To unset, use
--no-assume-unchanged. To see which files
have the "assume unchanged" bit set, use
git ls-files -v
The command looks at
core.ignorestat configuration variable. When
this is true, paths updated with
git update-index paths... and
paths updated with other Git commands that update both index and
working tree (e.g. git apply --index, git checkout-index -u,
and git read-tree -u) are automatically marked as "assume
unchanged". Note that "assume unchanged" bit is not set if
git update-index --refresh finds the working tree file matches
the index (use
git update-index --really-refresh if you want
to mark them as "assume unchanged").
To update and refresh only the files already checked out:
$ git checkout-index -n -f -a && git update-index --ignore-missing --refresh
- On an inefficient filesystem with
$ git update-index --really-refresh (1) $ git update-index --no-assume-unchanged foo.c (2) $ git diff --name-only (3) $ edit foo.c $ git diff --name-only (4) M foo.c $ git update-index foo.c (5) $ git diff --name-only (6) $ edit foo.c $ git diff --name-only (7) $ git update-index --no-assume-unchanged foo.c (8) $ git diff --name-only (9) M foo.c
forces lstat(2) to set "assume unchanged" bits for paths that match index.
mark the path to be edited.
this does lstat(2) and finds index matches the path.
this does lstat(2) and finds index does not match the path.
registering the new version to index sets "assume unchanged" bit.
and it is assumed unchanged.
even after you edit it.
you can tell about the change after the fact.
now it checks with lstat(2) and finds it has been changed.
Skip-worktree bit can be defined in one (long) sentence: When reading an entry, if it is marked as skip-worktree, then Git pretends its working directory version is up to date and read the index version instead.
To elaborate, "reading" means checking for file existence, reading file attributes or file content. The working directory version may be present or absent. If present, its content may match against the index version or not. Writing is not affected by this bit, content safety is still first priority. Note that Git can update working directory file, that is marked skip-worktree, if it is safe to do so (i.e. working directory version matches index version)
Although this bit looks similar to assume-unchanged bit, its goal is different from assume-unchanged bit’s. Skip-worktree also takes precedence over assume-unchanged bit when both are set.
This mode is designed for repositories with very large indexes, and aims at reducing the time it takes to repeatedly write these indexes.
In this mode, the index is split into two files, $GIT_DIR/index and $GIT_DIR/sharedindex.<SHA-1>. Changes are accumulated in $GIT_DIR/index, the split index, while the shared index file contains all index entries and stays unchanged.
All changes in the split index are pushed back to the shared index file when the number of entries in the split index reaches a level specified by the splitIndex.maxPercentChange config variable (see git-config).
Each time a new shared index file is created, the old shared index files are deleted if their modification time is older than what is specified by the splitIndex.sharedIndexExpire config variable (see git-config).
To avoid deleting a shared index file that is still used, its modification time is updated to the current time everytime a new split index based on the shared index file is either created or read from.
This cache is meant to speed up commands that involve determining
untracked files such as
This feature works by recording the mtime of the working tree
directories and then omitting reading directories and stat calls
against files in those directories whose mtime hasn’t changed. For
this to work the underlying operating system and file system must
st_mtime field of directories if files in the directory
are added, modified or deleted.
You can test whether the filesystem supports that with the
--test-untracked-cache option. The
--untracked-cache option used
to implicitly perform that test in older versions of Git, but that’s
no longer the case.
If you want to enable (or disable) this feature, it is easier to use
core.untrackedCache configuration variable (see
git-config) than using the
--untracked-cache option to
git update-index in each repository, especially if you want to do so
across all repositories you use, because you can set the configuration
false) in your
$HOME/.gitconfig just once
and have it affect all repositories you touch.
core.untrackedCache configuration variable is changed, the
untracked cache is added to or removed from the index the next time a
command reads the index; while when
are used, the untracked cache is immediately added to or removed from
The command honors
core.filemode configuration variable. If
your repository is on a filesystem whose executable bits are
unreliable, this should be set to false (see git-config).
This causes the command to ignore differences in file modes recorded
in the index and the file mode on the filesystem if they differ only on
executable bit. On such an unfortunate filesystem, you may
need to use git update-index --chmod=.
Quite similarly, if
core.symlinks configuration variable is set
to false (see git-config), symbolic links are checked out
as plain files, and this command does not modify a recorded file mode
from symbolic link to regular file.
The command looks at
core.ignorestat configuration variable. See
Using "assume unchanged" bit section above.
The command also looks at
core.trustctime configuration variable.
It can be useful when the inode change time is regularly modified by
something outside Git (file system crawlers and backup systems use
ctime for marking files processed) (see git-config).
The untracked cache extension can be enabled by the
core.untrackedCache configuration variable (see
Part of the git suite