Setup and Config
Getting and Creating Projects
Branching and Merging
Sharing and Updating Projects
Inspection and Comparison
- 2.0.3 no changes
- 2.0.2 07/16/14
- 2.0.1 no changes
- 2.0.0 05/28/14
- 184.108.40.206 → 1.9.4 no changes
- 1.8.4 08/23/13
- 220.127.116.11 → 18.104.22.168 no changes
- 1.8.3 05/24/13
- 22.214.171.124 → 126.96.36.199 no changes
- 188.8.131.52 04/07/13
- 184.108.40.206 04/07/13
- 220.127.116.11 → 18.104.22.168 no changes
- 1.8.1 12/31/12
- 22.214.171.124 no changes
- 126.96.36.199 12/10/12
- 188.8.131.52 → 184.108.40.206 no changes
- 220.127.116.11 10/08/12
- 18.104.22.168 no changes
- 22.214.171.124 09/18/12
- 1.7.12 08/20/12
git-submodule - Initialize, update or inspect submodules
'git submodule' [--quiet] add [-b <branch>] [-f|--force] [--name <name>] [--reference <repository>] [--depth <depth>] [--] <repository> [<path>] 'git submodule' [--quiet] status [--cached] [--recursive] [--] [<path>...] 'git submodule' [--quiet] init [--] [<path>...] 'git submodule' [--quiet] deinit [-f|--force] [--] <path>... 'git submodule' [--quiet] update [--init] [--remote] [-N|--no-fetch] [-f|--force] [--rebase|--merge] [--reference <repository>] [--depth <depth>] [--recursive] [--] [<path>...] 'git submodule' [--quiet] summary [--cached|--files] [(-n|--summary-limit) <n>] [commit] [--] [<path>...] 'git submodule' [--quiet] foreach [--recursive] <command> 'git submodule' [--quiet] sync [--recursive] [--] [<path>...]
Submodules allow foreign repositories to be embedded within a dedicated subdirectory of the source tree, always pointed at a particular commit.
They are not to be confused with remotes, which are meant mainly for branches of the same project; submodules are meant for different projects you would like to make part of your source tree, while the history of the two projects still stays completely independent and you cannot modify the contents of the submodule from within the main project. If you want to merge the project histories and want to treat the aggregated whole as a single project from then on, you may want to add a remote for the other project and use the subtree merge strategy, instead of treating the other project as a submodule. Directories that come from both projects can be cloned and checked out as a whole if you choose to go that route.
Submodules are composed from a so-called
gitlink tree entry
in the main repository that refers to a particular commit object
within the inner repository that is completely separate.
A record in the
.gitmodules (see linkgit:gitmodules) file at the
root of the source tree assigns a logical name to the submodule and
describes the default URL the submodule shall be cloned from.
The logical name can be used for overriding this URL within your
local repository configuration (see submodule init).
This command will manage the tree entries and contents of the gitmodules file for you, as well as inspect the status of your submodules and update them. When adding a new submodule to the tree, the add subcommand is to be used. However, when pulling a tree containing submodules, these will not be checked out by default; the init and update subcommands will maintain submodules checked out and at appropriate revision in your working tree. You can briefly inspect the up-to-date status of your submodules using the status subcommand and get a detailed overview of the difference between the index and checkouts using the summary subcommand.
Add the given repository as a submodule at the given path to the changeset to be committed next to the current project: the current project is termed the "superproject".
This requires at least one argument: <repository>. The optional argument <path> is the relative location for the cloned submodule to exist in the superproject. If <path> is not given, the "humanish" part of the source repository is used ("repo" for "/path/to/repo.git" and "foo" for "host.xz:foo/.git"). The <path> is also used as the submodule’s logical name in its configuration entries unless
--nameis used to specify a logical name.
<repository> is the URL of the new submodule’s origin repository. This may be either an absolute URL, or (if it begins with ./ or ../), the location relative to the superproject’s origin repository (Please note that to specify a repository foo.git which is located right next to a superproject bar.git, you’ll have to use ../foo.git instead of ./foo.git - as one might expect when following the rules for relative URLs - because the evaluation of relative URLs in Git is identical to that of relative directories). If the superproject doesn’t have an origin configured the superproject is its own authoritative upstream and the current working directory is used instead.
<path> is the relative location for the cloned submodule to exist in the superproject. If <path> does not exist, then the submodule is created by cloning from the named URL. If <path> does exist and is already a valid Git repository, then this is added to the changeset without cloning. This second form is provided to ease creating a new submodule from scratch, and presumes the user will later push the submodule to the given URL.
In either case, the given URL is recorded into .gitmodules for use by subsequent users cloning the superproject. If the URL is given relative to the superproject’s repository, the presumption is the superproject and submodule repositories will be kept together in the same relative location, and only the superproject’s URL needs to be provided: git-submodule will correctly locate the submodule using the relative URL in .gitmodules.
Show the status of the submodules. This will print the SHA-1 of the currently checked out commit for each submodule, along with the submodule path and the output of git describe for the SHA-1. Each SHA-1 will be prefixed with
-if the submodule is not initialized,
+if the currently checked out submodule commit does not match the SHA-1 found in the index of the containing repository and
Uif the submodule has merge conflicts.
--recursiveis specified, this command will recurse into nested submodules, and show their status as well.
If you are only interested in changes of the currently initialized submodules with respect to the commit recorded in the index or the HEAD, linkgit:git-status and linkgit:git-diff will provide that information too (and can also report changes to a submodule’s work tree).
Initialize the submodules recorded in the index (which were added and committed elsewhere) by copying submodule names and urls from .gitmodules to .git/config. Optional <path> arguments limit which submodules will be initialized. It will also copy the value of
submodule.$name.updateinto .git/config. The key used in .git/config is
submodule.$name.url. This command does not alter existing information in .git/config. You can then customize the submodule clone URLs in .git/config for your local setup and proceed to
git submodule update; you can also just use
git submodule update --initwithout the explicit init step if you do not intend to customize any submodule locations.
Unregister the given submodules, i.e. remove the whole
submodule.$namesection from .git/config together with their work tree. Further calls to
git submodule update,
git submodule foreachand
git submodule syncwill skip any unregistered submodules until they are initialized again, so use this command if you don’t want to have a local checkout of the submodule in your work tree anymore. If you really want to remove a submodule from the repository and commit that use linkgit:git-rm instead.
--forceis specified, the submodule’s work tree will be removed even if it contains local modifications.
Update the registered submodules, i.e. clone missing submodules and checkout the commit specified in the index of the containing repository. This will make the submodules HEAD be detached unless
--mergeis specified or the key
submodule.$name.updateis set to
nonecan be overridden by specifying
--checkout. Setting the key
commandto be run.
commandcan be any arbitrary shell command that takes a single argument, namely the sha1 to update to.
If the submodule is not yet initialized, and you just want to use the setting as stored in .gitmodules, you can automatically initialize the submodule with the
--recursiveis specified, this command will recurse into the registered submodules, and update any nested submodules within.
--forceis specified, the submodule will be checked out (using
git checkout --forceif appropriate), even if the commit specified in the index of the containing repository already matches the commit checked out in the submodule.
Show commit summary between the given commit (defaults to HEAD) and working tree/index. For a submodule in question, a series of commits in the submodule between the given super project commit and the index or working tree (switched by
--cached) are shown. If the option
--filesis given, show the series of commits in the submodule between the index of the super project and the working tree of the submodule (this option doesn’t allow to use the
--cachedoption or to provide an explicit commit).
--submodule=logoption with linkgit:git-diff will provide that information too.
Evaluates an arbitrary shell command in each checked out submodule. The command has access to the variables $name, $path, $sha1 and $toplevel: $name is the name of the relevant submodule section in .gitmodules, $path is the name of the submodule directory relative to the superproject, $sha1 is the commit as recorded in the superproject, and $toplevel is the absolute path to the top-level of the superproject. Any submodules defined in the superproject but not checked out are ignored by this command. Unless given
--quiet, foreach prints the name of each submodule before evaluating the command. If
--recursiveis given, submodules are traversed recursively (i.e. the given shell command is evaluated in nested submodules as well). A non-zero return from the command in any submodule causes the processing to terminate. This can be overridden by adding || : to the end of the command.
As an example,
git submodule foreach 'echo $path `git rev-parse HEAD`'will show the path and currently checked out commit for each submodule.
Synchronizes submodules' remote URL configuration setting to the value specified in .gitmodules. It will only affect those submodules which already have a URL entry in .git/config (that is the case when they are initialized or freshly added). This is useful when submodule URLs change upstream and you need to update your local repositories accordingly.
"git submodule sync" synchronizes all submodules while "git submodule sync -- A" synchronizes submodule "A" only.
Only print error messages.
Branch of repository to add as submodule. The name of the branch is recorded as
This option is only valid for add, deinit and update commands. When running add, allow adding an otherwise ignored submodule path. When running deinit the submodule work trees will be removed even if they contain local changes. When running update, throw away local changes in submodules when switching to a different commit; and always run a checkout operation in the submodule, even if the commit listed in the index of the containing repository matches the commit checked out in the submodule.
This option is only valid for status and summary commands. These commands typically use the commit found in the submodule HEAD, but with this option, the commit stored in the index is used instead.
This option is only valid for the summary command. This command compares the commit in the index with that in the submodule HEAD when this option is used.
This option is only valid for the summary command. Limit the summary size (number of commits shown in total). Giving 0 will disable the summary; a negative number means unlimited (the default). This limit only applies to modified submodules. The size is always limited to 1 for added/deleted/typechanged submodules.
This option is only valid for the update command. Instead of using the superproject’s recorded SHA-1 to update the submodule, use the status of the submodule’s remote-tracking branch. The remote used is branch’s remote (
branch.<name>.remote), defaulting to
origin. The remote branch used defaults to
master, but the branch name may be overridden by setting the
submodule.<name>.branchoption in either
This works for any of the supported update procedures (
--rebase, etc.). The only change is the source of the target SHA-1. For example,
submodule update --remote --mergewill merge upstream submodule changes into the submodules, while
submodule update --mergewill merge superproject gitlink changes into the submodules.
In order to ensure a current tracking branch state,
update --remotefetches the submodule’s remote repository before calculating the SHA-1. If you don’t want to fetch, you should use
submodule update --remote --no-fetch.
Use this option to integrate changes from the upstream subproject with your submodule’s current HEAD. Alternatively, you can run
git pullfrom the submodule, which is equivalent except for the remote branch name:
update --remoteuses the default upstream repository and
git pulluses the submodule’s
submodule.<name>.branchif you want to distribute the default upstream branch with the superproject and
branch.<name>.mergeif you want a more native feel while working in the submodule itself.
This option is only valid for the update command. Don’t fetch new objects from the remote site.
This option is only valid for the update command. Checkout the commit recorded in the superproject on a detached HEAD in the submodule. This is the default behavior, the main use of this option is to override
submodule.$name.updatewhen set to
none. If the key
submodule.$name.updateis either not explicitly set or set to
checkout, this option is implicit.
This option is only valid for the update command. Merge the commit recorded in the superproject into the current branch of the submodule. If this option is given, the submodule’s HEAD will not be detached. If a merge failure prevents this process, you will have to resolve the resulting conflicts within the submodule with the usual conflict resolution tools. If the key
submodule.$name.updateis set to
merge, this option is implicit.
This option is only valid for the update command. Rebase the current branch onto the commit recorded in the superproject. If this option is given, the submodule’s HEAD will not be detached. If a merge failure prevents this process, you will have to resolve these failures with linkgit:git-rebase. If the key
submodule.$name.updateis set to
rebase, this option is implicit.
This option is only valid for the update command. Initialize all submodules for which "git submodule init" has not been called so far before updating.
This option is only valid for the add command. It sets the submodule’s name to the given string instead of defaulting to its path. The name must be valid as a directory name and may not end with a /.
- --reference <repository>
This option is only valid for add and update commands. These commands sometimes need to clone a remote repository. In this case, this option will be passed to the linkgit:git-clone command.
NOTE: Do not use this option unless you have read the note for linkgit:git-clone's
This option is only valid for foreach, update and status commands. Traverse submodules recursively. The operation is performed not only in the submodules of the current repo, but also in any nested submodules inside those submodules (and so on).
This option is valid for add and update commands. Create a shallow clone with a history truncated to the specified number of revisions. See linkgit:git-clone
Paths to submodule(s). When specified this will restrict the command to only operate on the submodules found at the specified paths. (This argument is required with add).
When initializing submodules, a .gitmodules file in the top-level directory
of the containing repository is used to find the url of each submodule.
This file should be formatted in the same way as
$GIT_DIR/config. The key
to each submodule url is "submodule.$name.url". See linkgit:gitmodules
Part of the linkgit:git suite